Sunday, January 15, 2012

What Can I Do To Get Sharp Images With A Compact Camera?

Okay, so you've been watching how the capability of very compact cameras has been increasing quickly, blurring the lines between compact and SLR, amateur and "pro" equipment.  These changes are real.  For example, the Lumix DMC-LX5 has many features and image quality previously restricted to more expensive (and heavier, larger) cameras.

From The Online Photographer
Image Source: 
http://theonlinephotographer.typepad.com/.a/
6a00df351e888f8834014e89d45965970d-800wi

 

But, the compactness and lightness of these new models is both blessing and curse.  Okay, mostly blessing, speaking as someone whose back has suffered from 40 lb camera bags.  One drawback is that the new cameras are so small, it's very difficult to hold them still during exposure, which is necessary to avoid blurring of the image when using slower shutter speeds.  Also, using an LCD display to frame your shot, with your arms extended, puts you in a less stable position to begin with.  So, how do you eliminate your own motion during shooting and get those sharp images you want?

 

In a lively forum entry on dpreview.com, user Rick880 asked this very question.  Here is a link (click here), but I will save you some reading time by summarizing the ideas for you:

 

First off - the old standard - a good tripod and cable release.  The small camera blessing applies here, as you can get away with a very compact tripod, with so little weight to stabilize.  Cable releases are available for some models, but not all.  In the case of the DMC-LX5, Richard Franiec's website (click here) offers this nice adapter that uses a standard screw-in cable release.  You can order the product directly via email/Paypal.

Photo source: http://www.kleptography.com/rf/lx3_04.jpg


But, a even a small tripod may be more than you want to carry.


A second approach is to use something - the neck strap, a string or chain connected to the camera, usually through the tripod mount on the bottom of the camera, and pull it tight while you've got the camera in shooting position.  This lends some stiffness to your body and arms, which can significantly reduce motion.  Here's an example of a homemade version from instructables.com:


"String Tripod"

Image Source: http://www.instructables.com

/image/F1N2WJVF0ZSTF17/String-Tripod.jpg


A third method is to use the camera's internal timer to trigger the shutter.  This removes the tendency to move the camera when pushing down on the shutter release with your finger.  However, it requires a subject that will wait a few seconds for your timer to go off, without missing the shot.


Fourth, most new compacts have a "burst" mode, where they will take multiple images in rapid succession.  If you take several pictures, you can usually find one that's very sharp.  This has the same disadvantage, in that it's only useful if your subject is holding still.


Finally, some advanced compacts, the DMC-LX5 included, have optional viewfinders (the LVF1 in the case of the LX5).  This may be the best way to avoid that "arm's length" motion, by bringing the camera back to your eye, which is where it belongs in my opinion.  You are much more stable in this position than with your arms extended, camera at the far end.


I hope you find these tips helpful.  These little cameras really are amazing - don't let their small size be a disadvantage!


DMC-365.blogspot.com


No comments:

Post a Comment